Insulation in Bay County, Florida can help reduce the amount of energy needed to heat and cool your home. If you have low attic insulation levels or you have significant air leaks, your heating and cooling system will work harder to maintain comfort, and your utility bills will likely be higher than necessary.

When insulating your attic, it’s important to use a high-quality material that will last. ENERGY STAR estimates that proper attic insulation can reduce your annual utility bill by about 10 percent.

Get a Free Quote on Attic Insulation Today | Insulation Panama City

The most common type of attic insulation is fiberglass blanket or batts. This consists of fiberglass, cotton, mineral wool or plastic fibers and comes in rolls and blankets. This is the most popular choice and has an R-value of between 2.9 to 3.8 per inch. This is relatively inexpensive and easy to install, but it does not stop air leaks as well as foam or cellulose. It also can be irritating to the lungs and skin, so it’s best used with a mask.

Reflective or radiant barrier insulation consists of a reflective surface and is installed in attics to reduce heat gain. This is an effective choice in warmer climates, but it can lose effectiveness if it gets dirty. It is also not a good choice for attics with tight spaces, lots of obstacles, or limited headroom for maneuvering.

Spray foam is the most efficient attic insulation option and is available as open- or closed-cell spray. It is best installed by trained professionals due to its chemical handling. It acts as both an insulator and air barrier and fills every gap and crack.

Insulation Panama City
6909 Hwy 22, Panama City, FL 32404
(850) 713-5744